Synoshi, these are my tips for cleaning the bathroom

Clean your bathroom with Synoshi from the first corner to the last

Synoshi has become the most used household cleaning brush in more than 40 countries because it is very effective and allows you to remove embedded dirt from any corner, from the veneer to the taps, with total effectiveness.

How to clean the bathroom veneer with the Synoshy electric cleaning brush?

If you want the tiles in your bathroom to look like new, it is advisable to follow the following recommendations, both for mold stains caused by humidity and for traces of dirt or lime.

• If you want to use natural products, it is advisable to mix vinegar and a little water with salt and pass it over the dirty areas.
• On the other hand, if you use chemical products, it is also advisable to do a small pass and let them act.
• Next, attach the hard head of the Synoshi cleaning brush and perform a high-speed pass.
• For the corners, you have a specially designed head that ends in a point and that will adapt to reach the last bit of dirt.
• Finally, you can give it a touch with the soft head and use only water (or water with wax) to remove any remaining products.

Much less effort when using the Synoshi cleaning brush in the bathroom

Cleaning the bathroom faucet with the Synoshi cleaning brush can be very simple

If you have rust on the faucets or in the drain filters in your bathroom, you can use a very simple method with natural ingredients that will allow you to restore the rusty areas, and that will also work with lime.

• For rust stains, prepare two tablespoons of baking soda and approximately the juice of half a lemon
• If what you have is lime, it is advisable to dilute Vinegar in water in a proportion of 1/4 (3 vinegar and one water).
• In both cases, it is advisable to cover the stains with their corresponding solutions and let them act.
• Once the compounds have worked, the thick head of the Synoshy brush will remove dirt very easily.
• Finally, with the fine head, the cleaning is finished using water.
• If you prefer to use chemical cleaners instead of natural ones, the result will be equally effective.

Revitalize your shower head with the Synoshy electric cleaning brush

To finish this review, we will explain a little trick to clear the holes in the shower head that tend to get clogged due to dirt and limescale.

• First, remove the water outlet part of the shower head.
• Then let it soak in a 50% white vinegar solution for about 15 minutes.
• Finally, with the diro head of the Synoshy electric cleaning brush, make a couple of passes until any remaining dirt is removed.
• By following these steps, your shower will be like new, with all the water pressure and flow it had again.

Final conclusions on the process of cleaning the bathroom with the household cleaning brush

Following this process, and the different tips, we have managed to leave our bathroom spotless and with little effort. This review is based on my own experiences and we hope that they help you in your daily life.

Your opinion is of great value to me

Currently you can evaluate the device and leave your comments, we will publish the opinions submitted by our real users after reviewing them. Remember that racist, xenophobic comments, insults or spam are not allowed. Your email will not be published in any case.